User Manual Q&AAnswer
Jan 14, 2025 - 11:00 PM
To switch on the VERMEIREN SE09 Electric Wheelchair Controller, press the ON/OFF button once. The LED (status indicator) in the ON/OFF button will turn on and when it turns green, the operating console is ready for operation. To switch off the controller, press the ON/OFF button once again. The operating console will power down and the status indicator will go out.
It is important to note that the joystick should be in the neutral (central) position before pressing the ON/OFF button. If the console is switched on with the joystick out of the neutral position, the wheelchair will not drive. If the joystick is not released within 5 seconds, a Module fault will occur, indicated by the red blinking LED in the ON/OFF button. To clear the Module fault, release the joystick and switch the operating console OFF and then ON again.
Please refer to the VERMEIREN SE09 Electric Wheelchair Controller User Manual for more detailed instructions and safety precautions.
Add New Comment