User Manual Q&AAnswer
Jan 14, 2025 - 10:18 PM
To install the BOSCH DWZ1IB6N1(00) Shaft Extension, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Read the instruction manual carefully and keep it for future reference.
2. Ensure that the appliance is correctly installed according to the safety instructions. The installer is responsible for ensuring the appliance works perfectly at its installation location.
3. Only a licensed expert should connect the appliance, and the power supply should be switched off before carrying out any work.
4. When installing the optional accessory, observe the safety instructions provided.
5. Keep packaging material away from children to avoid the risk of suffocation.
6. Wear protective gloves as components inside the appliance may have sharp edges.
7. If you want to see a video demonstration of the duct extension installation, scan the QR code provided in the manual.
8. After unpacking all parts, check for any damage in transit and ensure the completeness of the delivery.
9. To install the channel extension, position the drilling template in the middle at the front edge of the unit and secure it in place using suitable adhesive tape.
10. Use a bradawl to mark the fixing points for the retaining bracket on the top of the unit through the drill jig.
11. xxxx on the two angle brackets on the right and left of the ceiling cut-out.
12. Install the lower channel extension on the base of the unit.
13. Guide the upper channel extension into the angle brackets and place it over the lower channel extension.
Please refer to the figures mentioned in the manual (Fig. 1 to Fig. 7) for visual guidance during the installation process.
Note: It is always recommended to consult the instruction manual for specific details and illustrations related to your product model.
Add New Comment