User Manual Q&AAnswer
Jan 14, 2025 - 10:17 PM
To power on the Neoprobe MDM-150032 GDS System, follow these steps:
1. Press the Power Button on the console.
2. Insert a CR123 Lithium Ion Battery into the probe, making sure it is inserted in either direction, and close the cap.
3. Press the Probe Button to power up the probe.
Once powered on, the Mode Indicator LED on the probe will illuminate solid blue.
To link the wireless probe to the console for the first time, follow these steps:
1. The console will display " . ".
2. Press and hold the Target Count Button on the console. The console will display " . ".
3. Once linked, the Mode Indicator LED on the probe will flash blue.
If you need to link the wireless probe to the console again (subsequent links to the same unit), follow these steps:
1. Press the Power Button on the console. Confirm that " " is displayed on the screen.
2. Power up the probe by pressing the Probe Button. It will automatically link to the console within five seconds.
If the probe goes into sleep mode to conserve battery power, you can relink it to the console by following these steps:
1. Press the Probe Button to "awaken" the probe.
2. The probe will automatically relink to the console within five seconds.
If you require additional assistance, you can contact Mammotome Technical Support at 1-877-926-2666 (Option 3) or email them at TechnicalSupport@mammotome.com.
Please note that the information provided is based on the Neoprobe MDM-150032 GDS System User Guide.
Add New Comment