User Manual Q&AAnswer
Jan 14, 2025 - 10:14 PM
To connect the ArduCAM B0272 camera module to your Raspberry Pi, follow these steps:
1. Insert the connector into the camera module, ensuring that it is facing the Raspberry Pi MIPI port.
2. Make sure not to bend the flex cable and firmly insert it into the connector.
3. Push the plastic connector down while holding the flex cable until the connector is securely in place.
For more detailed information and visual instructions, please refer to the user manual provided with the camera module.
Note: It is important to ensure proper connection to avoid any damage to the camera or Raspberry Pi.
Add New Comment