User Manual Q&AAnswer
Jan 14, 2025 - 10:09 PM
To install the Paul Neuhaus 9785-96-01 LED Wall Light, please follow the instructions below:
1. Start by turning off the power supply to the installation area at the main circuit breaker.
2. Remove the mounting plate from the wall light fixture by unscrewing the screws located on the back of the fixture.
3. Use a screwdriver to remove the existing wall light fixture from the wall.
4. Connect the electrical wires from the wall to the corresponding wires on the back of the Paul Neuhaus 9785-96-01 LED Wall Light. Make sure to match the colors of the wires (e.g., black to black, white to white).
5. Securely mount the mounting plate of the Paul Neuhaus 9785-96-01 LED Wall Light to the wall using the provided screws and wall anchors, if necessary.
6. Attach the wall light fixture to the mounting plate by aligning the xxxx holes and tightening the screws.
7. Turn on the power supply at the main circuit breaker and test the wall light to ensure it is functioning properly.
Please note that these instructions are a general guideline, and it is always recommended to refer to the specific instruction manual provided with the product for detailed and accurate installation steps.
Add New Comment