User Manual Q&AAnswer
Jan 14, 2025 - 09:56 PM
To properly lift a vehicle using the DAYTONA DA-15PR 1.5Ton High Performance Racing Jack, follow these steps:
1. Park the vehicle on a flat, level, solid surface away from oncoming traffic. Turn off the vehicle's engine and place the transmission in "PARK" (if automatic) or in its lowest gear (if manual). Set the vehicle's emergency brake and chock the wheels that are not being lifted.
2. Turn the handle counterclockwise to lower the jack until it is fully lowered. Then, turn the handle firmly clockwise to close it.
3. Position the saddle of the jack under the vehicle manufacturer's recommended lifting point. Refer to the vehicle manufacturer's owner's manual for the location of the frame lifting point.
4. Pump the handle until the top of the jack's saddle has nearly reached the vehicle lifting point. Position the saddle directly under the vehicle's lifting point.
5. To lift the vehicle, pump the handle using smooth, full strokes.
6. Once the vehicle is raised, slide a jack stand of appropriate capacity (not included) under a proper lifting point referred to in the vehicle owner's manual. Always use two jack stands and position them at the same point on each side of the vehicle.
7. Center the saddle of the jack stand(s) under the vehicle's lifting point(s) and set the jack stand(s) to the same height according to the manufacturer's instructions, making sure they lock securely into position.
8. Slowly turn the handle counterclockwise to lower the vehicle onto the saddle(s) of the jack stand(s). Then, turn the handle firmly clockwise to close it.
Please note that these instructions are a summary and it is important to read and understand the entire owner's manual for the DAYTONA DA-15PR 1.5Ton High Performance Racing Jack before using it.
Add New Comment