User Manual Q&AAnswer
Jan 14, 2025 - 09:45 PM
To fit the plug-in tools onto the Einhell TE-MG 300 EQ Oscillating Multi Tool, follow these steps:
1. Open the quick-release lock for changing tools located on the tool chuck.
2. Hold the multifunction tool with the On/Off switch pointing down and the tool chuck facing up.
3. Place the plug-in tool (e.g., scraper, saw blade) on the tool chuck, ensuring that the pins of the tool chuck fit into the recesses in the plug-in tool. The tool chuck is magnetic to secure the plug-in tool during the clamping procedure.
4. Close the quick-release lock for changing tools, making sure that the pins of the chuck remain in the recesses in the plug-in tool.
Note: The equipment also comes with a disk for safely securing plug-in tools with recesses. Ensure that the camber of the disk faces the tool for plug-in tools with recesses.
Please refer to the instruction manual for visual illustrations and additional information on fitting the plug-in tools.
Add New Comment