User Manual Q&AAnswer
Jan 14, 2025 - 09:43 PM
To install the vivo DESK-AC03B Black Pull Out 18 Inch Under Desk Drawer, please follow the steps below:
1. Assemble the brackets (B) to the drawer (A) using the M6x8 screws (C). Tighten the screws with a Phillips screwdriver.
2. Slide the drawer (A) open and locate the black levers on either side of the track. Lift up on the left lever and press down on the right lever to remove the drawer from the housing.
3. Determine the mounting location for the drawer (A). It is recommended to position the housing 19mm (3/4") back from the edge of the mounting surface. The desk should be at least 18mm (11/16") thick.
4. Using the housing from the drawer (A) as a guide, mark the drilling locations with a pencil. Then, drill pilot holes using a 3/32" drill bit.
5. Mount the drawer housing to the surface using the M5x15 screws (D) and a Phillips screwdriver.
6. Finally, insert the drawer back into the housing.
Please ensure that you do not exceed the weight capacity of the drawer, as doing so may result in serious injury.
If you have any further questions or need assistance, you can contact VIVO's dedicated support team at 309-278-5303 or via email at help@vivo-us.com. They are available Monday to Friday from 7:00 am to 7:00 pm CST and will be happy to help you.
Add New Comment