How do I install the Metra 95-7019 Double DIN Dash Kit? (Metra 95-7019 Double Din Dash Kit Instruction Manual)

Answer

manuals.plus

Jan 14, 2025 - 09:37 PM


To install the Metra 95-7019 Double DIN Dash Kit, follow these steps:

1. Start by using a panel removal tool to unclip and remove the trim panel surrounding the radio, including the vents.
2. Remove the four screws securing the radio. Slide the radio out and unplug and remove it.
3. Attach the radio brackets to the radio trim panel using the four Phillips screws provided.
4. Slide the radio into the completed assembly and secure it to the assembly using the screws supplied with the radio.
5. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS.
6. Reconnect the negative battery terminal and test the radio for proper operation.
7. Reassemble the dash in reverse order of disassembly.

If you encounter any difficulties during the installation process, you can contact Metra's Tech Support line at 386-257-1187 or via email at techsupport@metra-autosound.com. Their support hours are Monday - Friday: 9:00 AM - 7:00 PM, Saturday: 10:00 AM - 7:00 PM, and Sunday: 10:00 AM - 4:00 PM.

For further enhancement of your installation and fabrication skills, you can consider enrolling in the Installer Institute, a recognized and respected mobile electronics school in the industry. You can visit their website at www.installerinstitute.com or call 800-354-6782 for more information.