User Manual Q&AAnswer
Jan 14, 2025 - 09:35 PM
To install the KUZCO EG96428 LED Exterior Garden light fixture, follow these steps:
1. Ensure that the power is completely turned off before starting the installation.
2. It is recommended to have a qualified licensed electrician install the fixture.
3. Prepare the installation area by clearing it of any obstructions.
4. Wear gloves throughout the installation process.
5. Carefully read and follow the instructions provided in the manual.
6. Keep the installation sheet for future reference.
7. If you require technical support, you can contact KUZCO at 1-855-855-8926.
Important Notes:
- The Kuzco LED fixture comes with pre-wired LED modules. Avoid touching any part of the LED modules, as unnecessary contact may cause permanent damage.
- The fixture operates on a 12V input with an Outdoor Rated Low Voltage Transformer (supplied separately).
- This fixture is non-dimming.
- For typical ground stake mounting, follow the steps below.
- Do not install the luminaires within 10 feet of a pool, spa, or fountain.
Installation Steps:
1. Remove the fixture from its original packaging.
2. Run the fixture wire (1b) from the fixture (1a) through the mounting hole on top of the ground stake (3a).
3. Run the transformer wire (supplied separately) to the intended installation location.
4. Attach the fixture thread (1d) (Note: fixture thread (1d) is 1/2-14 NPT) to the ground stake (3a) by threading it clockwise until it fits snugly.
5. Fill the outdoor rated wire nuts (2a) with silicone sealant (not provided). Cut and strip the fixture wires (1b) and connect them to the transformer wire using the outdoor rated wire nuts (2a) provided (refer to Illustration 1 in the manual).
6. Place the stake (3a) in the desired position and insert it into the ground until the flange of the stake is flush with the ground.
Important Notes:
- The low voltage wires are intended for shallow burial, less than 6 inches.
- For multiple low-voltage garden light installations, daisy-chain the low voltage wire to each fixture from the 12V transformer.
For further assistance or more detailed instructions, please refer to the KUZCO EG96428 LED Exterior Garden Instruction Manual provided with the product.
Add New Comment