How do I install the Philips 164659316 myGarden Wall Light? (Philips 164659316 myGarden Wall Light User Manual)

Answer

manuals.plus

Jan 14, 2025 - 09:34 PM

To install the Philips 164659316 myGarden Wall Light, please follow the steps outlined in the user manual provided with the product. Here is a step-by-step guide:

1. Before starting the installation, make sure you have all the necessary tools mentioned in the "In The Box" section of the manual.

2. Choose a suitable location for the wall light. Ensure that it is near a power source and that the wall surface is strong enough to support the fixture.

3. Switch off the power supply before proceeding with the installation to ensure safety.

4. Remove the cover of the wall light by unscrewing the screws or following the instructions provided in the manual.

5. Connect the wires of the wall light to the power supply according to the wiring diagram provided in the manual. It is recommended to seek the assistance of a qualified electrician if you are unsure about the wiring process.

6. Once the wiring is complete, secure the wall light to the wall using the screws and mounting bracket provided. Make sure it is firmly attached and level.

7. Replace the cover of the wall light and tighten the screws to secure it in place.

8. After the installation is complete, switch on the power supply and test the wall light to ensure it is functioning properly.

For more detailed instructions and illustrations, please refer to the user manual provided with the Philips 164659316 myGarden Wall Light. If you have any further questions or concerns, you can contact the Philips Lighting Contact Centre using the contact information provided in the manual or visit their website at www.philips.com/homelighting.