User Manual Q&AAnswer
Jan 14, 2025 - 09:24 PM
To install the PHILIPS RC132V RC LED Panels, please follow the installation instructions provided in the user manual. Here are the general steps:
1. Ensure that the luminaire is installed by a qualified electrician and wired according to the latest electrical regulations or national requirements.
2. The light source of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced.
3. During installation or maintenance, please use gloves to avoid spots on the cover.
4. To remove dirt and spots, use microfiber cloths for dust and a cleaner for synthetic materials with antistatic properties for fingerprints, etc.
5. The luminaire is not suitable for covering with thermally insulating material.
6. For controllable luminaires, the insulation between the low voltage (LV) supply and control conductors should be at least basic insulation.
7. The luminaire must not be used or stored in a corrosive environment where hazardous materials such as Sulphur, Chlorine, Phthalates, etc., are present.
For more detailed instructions and specific information, please refer to the user manual available via the Signify Service tag apps (Android and iOS) or consult the TrustSight Gen 3 Design guide.
It is important to follow these instructions to ensure safe use of the product and to maintain warranty coverage.
Add New Comment