User Manual Q&AAnswer
Jan 14, 2025 - 09:15 PM
To connect the SVEN KB-C3200W wireless keyboard and mouse combo to your computer, please follow these steps:
1. Open the cover of the battery compartment on the mouse and insert the included AA battery, making sure to match the polarity correctly. Close the cover securely.
2. Open the cover of the battery compartment on the keyboard and insert the included AA battery, again matching the polarity correctly. Close the cover securely.
3. Connect the 2.4 GHz USB nano receiver to a free USB port on your computer.
4. Press any button on the mouse or turn the scroll wheel to activate the set. If the connection is correct, the set will turn on automatically.
5. After you finish using the keyboard and mouse, you can remove the USB receiver from the computer and insert it into the mouse for storage.
6. If the mouse or keyboard don't work, you can try reconnecting them to the nano receiver. To reconnect the mouse, press its right button and the scroll wheel simultaneously, and while holding them, remove and insert the nano receiver back into the USB port. To reconnect the keyboard, press the "ESC" and "K" buttons simultaneously, and while holding them, remove and insert the nano receiver back into the USB port.
Note: Avoid placing the receiver in a confined metal space, as it may interfere with the wireless signal. If the batteries run low, replace them with new ones. If there is a long pause in operation, press any button to wake the keyboard or mouse from sleep mode.
For more detailed instructions and troubleshooting tips, please refer to the SVEN KB-C3200W Keyboard and Mouse Wireless Combo Set User Manual.
Add New Comment