User Manual Q&AAnswer
Jan 14, 2025 - 09:11 PM
To install the Camden CV-WRX4 Four Channel Wiegand Receiver, follow these steps:
1. Attach the rear part of the enclosure to the wall using the plugs and screws provided.
2. Pass the cables through the grommet of the enclosure.
3. Connect the power cables to the terminals marked on the motherboard as indicated.
4. Mount the receiver cover and pass the cables and the antenna through it.
For more detailed instructions and illustrations, please refer to the "Installation and Connections" section of the instruction manual provided with the product.
Note: It is important to install the receiver in a vertical position and firmly affix it to the building structure.
If you encounter any difficulties during the installation process, it is recommended to consult the manual or contact Camden Controls for further assistance.
Add New Comment