User Manual Q&AAnswer
Jan 14, 2025 - 08:41 PM
To install the castor assembly on the CANVAC COE5200V Q AIR Oil Filled Heater, follow these steps:
1. Turn the heater upside down.
2. Align the mounting holes in each caster assembly with the two studs at each end of the radiator.
3. Lower the caster assemblies over the studs.
4. Secure each caster assembly by screwing two butterfly nuts onto the studs.
5. Tighten the butterfly nuts.
6. Turn the heater the right way up so that it stands on the casters.
Please refer to figure 1 and figure 2 in the instruction manual for visual guidance on the installation process.
Add New Comment