User Manual Q&AAnswer
Jan 14, 2025 - 08:40 PM
To assemble the Honeywell W14L0683 6.5ft 400ct Eagle Peak Pine Prelit tree, please follow these steps:
1. Choose a location near an electrical wall outlet and place the tree stand on a level surface.
2. Remove the protective covers from the base of each section of the tree.
3. Unfold the tree base to a 90-degree angle.
4. Carefully insert the bottom section (C) of the tree into the tree base and tighten the xxxx .
5. Insert the middle section (B) of the tree into the bottom section (C).
6. Insert the top section (A) into the middle section (B). Note that there is a tree top connector on the top section (A).
7. Allow the branches to fall into place or gently pull branches up and out. Make sure all wires are free of branch hinges.
8. Shape the branches by starting with the tips closest to the pole. Shape one tip to the right, one to the left, and one along the center of the main stem. Repeat this pattern for each branch.
9. Plug the well-connected power supply cord plug 1 from the bottom section (C) into an electrical outlet. The tree also comes with an on/off foot pedal switch for easy illumination. Plug 2 is for the tree top lights. Plug the power supply cord plug 2 into an electrical outlet.
Please refer to the user manual for additional troubleshooting tips and instructions on replacing fuses and lamps.
Add New Comment