User Manual Q&AAnswer
Jan 14, 2025 - 08:39 PM
To set up and configure the LINOVISION IoT-R32L Cellular Router, please follow the steps outlined in the user guide. Here is a step-by-step guide:
1. Connect the router to a power source and ensure it is turned on.
2. Connect your computer or device to the router using an Ethernet cable or via Wi-Fi.
3. Open a web browser and enter the default IP address of the router (usually 192.168.1.1) in the address bar.
4. You will be prompted to enter a username and password. The default credentials are usually "admin" for both the username and password. If this doesn't work, refer to the user guide for the correct default credentials.
5. Once logged in, you will be directed to the router's web-based management interface.
6. Follow the on-screen instructions to configure the router according to your specific requirements. This may include setting up wireless networks, configuring security settings, and establishing internet connections.
7. Make sure to save your changes before exiting the management interface.
For more detailed instructions and advanced configuration options, please refer to the LINOVISION IoT-R32L Cellular Routers User Guide. It provides comprehensive information on all aspects of setting up and configuring the router.
Add New Comment