User Manual Q&AAnswer
Jan 14, 2025 - 08:35 PM
To install the license key for the ROHDE SCHWARZ R&S NRQ6 Frequency Selective Power Sensor, you can follow the instructions provided in the product's instruction manual. Here is a step-by-step guide:
1. Make sure that you have the most recent firmware version installed on the power sensor.
2. Open the web user interface of the power sensor.
3. In the navigation pane of the main dialog, select "System".
4. Click on "Enter License Key".
5. The "Enter License Key" dialog will be displayed.
6. If you have the license key manually, enter it under the "License Key" section. The license key should be provided in the software option list that came with the option.
7. If you have an RSI file, copy the RSI file that was delivered with the option into a folder that you can access with your R&S NRQ6 power sensor.
8. Click on "Browse License File" in the "Enter License Key" dialog.
9. Select the RSI file you want to install.
10. Click on "Apply".
11. Finally, click on "Reboot" to perform a reboot of the R&S NRQ6 power sensor.
12. After the reboot, check whether the option is active. The name of the option should be displayed under "Installed Options" in the web user interface.
If you need further information or have any other questions, please refer to the user manual of the ROHDE SCHWARZ R&S NRQ6 Frequency Selective Power Sensor.
Add New Comment