User Manual Q&AAnswer
Jan 14, 2025 - 08:24 PM
The installation instructions for the RAVAK ASDP3 Shower Door are provided in the manual. Here is a step-by-step guide on how to install the shower door:
1. Measure the dimensions of your shower area to determine the appropriate size of the shower door. Refer to the "TYP" column in the installation instructions to find the correct model based on your measurements.
2. Prepare the necessary tools and materials for installation, including a drill, screwdriver, level, silicone sealant, and any additional hardware provided with the shower door.
3. Follow the measurements provided in the "INSTALLATION INSTRUCTIONS" section to mark the correct placement of the shower door on the shower area.
4. Begin by installing the fixed panel of the shower door. Use the appropriate screws and anchors to secure it in place. Make sure it is level and plumb.
5. Install the sliding door panel by attaching it to the fixed panel using the provided hardware. Ensure that the sliding mechanism operates smoothly.
6. Apply silicone sealant along the edges of the shower door to prevent water leakage. Follow the manufacturer's instructions for proper application and drying time.
7. Double-check the alignment and stability of the shower door. Make any necessary adjustments to ensure a proper fit.
8. Clean the shower door and surrounding area to remove any debris or fingerprints.
9. Test the functionality of the shower door by opening and closing it several times. Ensure that it operates smoothly and securely.
Add New Comment