User Manual Q&AAnswer
Jan 14, 2025 - 08:19 PM
To update the firmware for the Schneider Electric PacT Series breakers and switches, you will need to use the EcoStruxure Power Commission software. Here are the steps to follow:
1. Download the latest version of the EcoStruxure Power Commission software from the Schneider Electric website at www.se.com.
2. Install the EcoStruxure Power Commission software on your computer.
3. Connect the Service Interface, which is a portable instrument designed for field testing, to your computer using the appropriate cable.
4. Open the EcoStruxure Power Commission software and check the firmware compatibility of the devices in the IMU (Intelligent Metering Unit).
5. If a firmware update is available for your PacT Series breaker or switch, select the device and update it with the latest firmware version available.
6. After updating the firmware of one device, use the EcoStruxure Power Commission software to check the firmware compatibility between all the devices in the IMU.
Please note that firmware updates are recommended to benefit from the latest features and bug fixes. However, it is important to only update the firmware if the latest features are required for your application and if bug fixes are provided. For more information about the firmware update policy and firmware compatibility between devices, refer to the "Firmware Update Policy" section in the user guide.
It is always recommended to consult the Schneider Electric PacT Series User Guide (DOCA0170EN) for detailed instructions and any specific requirements or considerations related to firmware updates.
Add New Comment