How do I properly install the BOSCH F 016 800 618 Wall and Tank Attachments? (Bosch F 016 800 618 Wall & Tank Attachments Instruction Manual)

Answer

manuals.plus

Jan 14, 2025 - 08:09 PM


To properly install the BOSCH F 016 800 618 Wall and Tank Attachments, please follow the instructions below:

1. Ensure that the product is compatible with your specific Bosch pressure washer model. Refer to the compatibility information provided in the instruction manual or on the packaging.

2. Start by identifying the appropriate attachment for your desired application. The Wall Attachment is designed for cleaning vertical surfaces such as walls and fences, while the Tank Attachment is used for drawing water from a static water source like a rainwater tank or bucket.

3. For the Wall Attachment:
   a. Attach the spray lance to the trigger gun of your pressure washer.
   b. Connect the Wall Attachment to the spray lance by aligning the grooves and twisting it clockwise until it locks into place.
   c. Adjust the angle of the Wall Attachment by rotating it to the desired position.
   d. Ensure that the attachment is securely fastened before operating the pressure washer.

4. For the Tank Attachment:
   a. Attach the suction hose to the water inlet of your pressure washer.
   b. Connect the other end of the suction hose to the Tank Attachment by aligning the grooves and twisting it clockwise until it locks into place.
   c. Submerge the suction hose into the water source, ensuring that it is fully immersed and free from any obstructions.
   d. Ensure that the attachment is securely fastened before operating the pressure washer.

Please note that these are general installation instructions. For specific details and illustrations, refer to the BOSCH F 016 800 618 Wall and Tank Attachments Instruction Manual provided with the product.