User Manual Q&AAnswer
Jan 14, 2025 - 10:11 AM
To charge the Sony ICD-TX660 Digital Voice Recorder, follow these steps:
1. Connect the supplied USB Type-C cable to the USB Type-C port on the recorder.
2. Connect the other end of the USB cable to a USB port on a running computer.
3. The battery indicator on the recorder will show a charging animation.
4. When the battery is fully charged, the charging animation will change to indicate a full charge.
5. Disconnect the recorder from the computer.
Note: You can also charge the battery by connecting a USB AC adaptor to a household power outlet. Make sure to use an adaptor that can supply an output current of 500 mA or more. Do not use a USB adaptor that exceeds the maximum output of 13 W (5 V, 2.6 A).
For more detailed instructions and information, refer to the Operating Instructions manual provided with the Sony ICD-TX660 Digital Voice Recorder.
Add New Comment