User Manual Q&AAnswer
Jan 14, 2025 - 03:31 AM
Lubricating the treadmill is an important maintenance step to ensure smooth and quiet operation. Here is how you can lubricate the Sunny Health & Fitness SF-T7632 treadmill:
1. Before lubricating, make sure the treadmill is turned off and unplugged from the power source.
2. Lift one side of the running belt to expose the running board.
3. Apply a small amount of treadmill lubricant to the center of the running board. Use a clean cloth to spread the lubricant evenly over the surface of the running board.
4. Repeat the process for the other side of the running belt.
5. Once the lubricant is applied, turn on the treadmill and let it run at a slow speed for a few minutes to distribute the lubricant.
6. Check the tension of the running belt and adjust if necessary. The running belt should be pulled out 50-75mm from the running board.
7. Regularly inspect the running belt and lubricate as needed, approximately every 188 miles of use.
Please refer to page 12 of the user manual for more detailed instructions on lubricating the treadmill.
Add New Comment