User Manual Q&AAnswer
Jan 14, 2025 - 02:41 AM
To connect the STAX SR-007A MK2 to a driver unit, please follow these steps:
1. Ensure that you have a dedicated STAX driver unit with a bias voltage of 580V. If you are unsure, please contact your STAX dealer for correct information.
2. The SR-007A MK2 has a 5-pin PRO bias jack exclusive to STAX Earspeakers. Connect the 5-pin PRO jack to the 5-pin PRO socket of the dedicated STAX driver unit.
3. Carefully position the 5-pin PRO jack with the raised mark on the plug in the upward position.
4. When removing the plug from the socket on your driver unit, always grasp the plug itself and not the cable.
Please refer to the owner's manual for further details and illustrations on connecting the SR-007A MK2 to a driver unit.
Add New Comment