User Manual Q&AAnswer
Jan 14, 2025 - 12:42 AM
To disassemble the Pride Mobility SC73 Go-Go Sport 3-Wheel Scooter for transportation or storage, follow these steps:
1. Ensure the scooter is turned off and the power switch is in the "off" position.
2. Locate the release lever or latch on the front of the scooter's seat. Depress the lever or release the latch to unlock the seat.
3. Lift the seat upwards and set it aside.
4. Locate the battery pack release lever or latch at the rear of the scooter. Depress the lever or release the latch to unlock the battery pack.
5. Lift the battery pack upwards and set it aside.
6. If equipped, locate the tiller release lever or latch near the base of the tiller. Depress the lever or release the latch to unlock the tiller.
7. Gently fold the tiller downwards towards the front of the scooter until it locks into place.
8. If necessary, remove any accessories or baskets attached to the scooter.
9. The scooter is now disassembled into lightweight components that can be easily transported or stored.
Please note that the specific disassembly process may vary slightly depending on the model and configuration of your Pride Mobility SC73 Go-Go Sport 3-Wheel Scooter. It is always recommended to consult the owner's manual for detailed instructions and illustrations specific to your scooter model.
Add New Comment