How do I install the SereneLife PUCWM200 Full-Automatic Compact Washer Machine? (SereneLife PUCWM200 Full-Automatic Compact Washer Machine User Guide)

Answer

manuals.plus

Jan 13, 2025 - 10:33 PM


To install the SereneLife PUCWM200 Full-Automatic Compact Washer Machine, follow these steps:

1. Place the washing machine on a level surface near a drainage point. Avoid using the washing machine on uneven, inclined, or unsteady ground as it may cause vibration during operation.

2. Remove the packaging foam at the bottom of the washing machine. This foam must be removed to ensure proper heat dissipation and prolong the service life of the machine.

3. If you need to connect the external drainage pipe, make sure it is not too long (not more than 2 meters) as it may affect the drain water. The drain outlet should not be higher than the height of the washing machine base.

4. The washing machine should be placed on a firm and level ground with a maximum allowable inclination angle of 2°. It should also be placed at least 5cm away from the wall to prevent noise during operation.

5. Ensure that the power socket is wired according to regulations and is reliably grounded.

6. When you start using the washing machine, there may be a small amount of water flowing out of the drain pipe. This is residual water from the factory performance inspection and is normal.

7. Connect the water inlet pipe and insert it into the water inlet of the washing machine.

Please refer to the user guide for more detailed instructions and illustrations on the installation process.