User Manual Q&AAnswer
Jan 13, 2025 - 06:03 AM
To replace the battery in the JRD&BS WINL WP9309 8.5 Colorful Electronic Drawing Pad, please follow these steps:
1. Make sure the drawing pad is turned off and remove the stylus from the device.
2. Locate the battery compartment on the back of the drawing pad. It is usually secured with a small xxxx or latch.
3. Use a screwdriver or your fingers to open the battery compartment.
4. Take out the old battery (CR2025) from the compartment. Be careful not to damage the battery or any other components.
5. Insert a new CR2025 battery into the compartment, making sure the positive (+) side is facing up.
6. Close the battery compartment securely, either by screwing it back in or closing the latch.
7. Turn on the drawing pad and check if the new battery is working properly.
Please refer to the user manual for more detailed instructions and illustrations on how to replace the battery in the JRD&BS WINL WP9309 8.5 Colorful Electronic Drawing Pad.
Add New Comment