Answer
Jan 13, 2025 - 04:18 AM
To replace the battery in the Derabika LCD01 10-Inch Erasable Drawing Tablet, please follow these steps:
1. Locate the battery compartment on the back of the drawing tablet.
2. Use a small screwdriver or a coin to carefully open the battery compartment cover.
3. Remove the old CR2025 button cell battery from the compartment.
4. Take the new CR2025 button cell battery and ensure that the positive (+) side is facing up.
5. Insert the new battery into the compartment, aligning it with the correct polarity.
6. Close the battery compartment cover securely.
7. Test the drawing tablet by turning it on and checking if it functions properly.
Note: The CR2025 button cell battery is a common type of battery and can be easily found at most electronic stores or online retailers. Make sure to use a replacement battery of the same type and voltage to ensure compatibility and optimal performance.
For more detailed instructions or visual guidance, please refer to the user manual provided with the Derabika LCD01 10-Inch Erasable Drawing Tablet.
Add New Comment