User Manual Q&AAnswer
Jan 13, 2025 - 04:15 AM
To connect the Orsen Electronic Sketch Drawing Pad Doodle Board to your computer or mobile device, follow these steps:
1. Charge the drawing pad using the included USB-C cable.
- Connect one end of the USB-C cable to the drawing pad and the other end to a suitable power source, such as a computer or wall adapter.
- Allow the drawing pad to fully charge before proceeding.
2. Power on the device and pair it with your computer or mobile device.
- Press the power button on the drawing pad to turn it on.
- If your device supports Bluetooth connectivity, enable Bluetooth on both the drawing pad and your computer or mobile device.
- Follow the pairing instructions specific to your operating system and device. This may involve searching for available devices, selecting the Orsen Electronic Sketch Drawing Pad, and confirming the pairing.
3. Install the necessary drivers and drawing software on your device.
- Visit the Orsen website or refer to the user manual for instructions on downloading and installing the required drivers and drawing software.
- Follow the installation prompts and ensure that the software is compatible with your operating system.
4. Use the stylus pen to start creating digital art on the drawing pad's surface.
- Once the drawing pad is connected to your computer or mobile device, you can start using the stylus pen to draw, sketch, or doodle on the drawing pad's surface.
- The stylus pen should be responsive and mimic the movements of a traditional pen or pencil.
Note: The specific steps for connecting the drawing pad may vary depending on your operating system and device. Refer to the user manual for detailed instructions and troubleshooting tips.
Add New Comment