User Manual Q&AAnswer
Jan 13, 2025 - 03:15 AM
To adjust the brightness and speed of the flame effect on the Duraflame DFI-5010-02-3A Electric Infrared Quartz Fireplace Stove, you can use the control panel or the included remote control. Here's how:
1. Using the Control Panel:
- Press the "Flame" button on the control panel to activate the flame effect.
- Press the "Flame" button repeatedly to cycle through the available brightness levels (low, medium, high).
- Press and hold the "Flame" button for a few seconds to activate the flame speed adjustment mode.
- While in the flame speed adjustment mode, press the "+" or "-" buttons to increase or decrease the flame speed, respectively.
- Release the "Flame" button to save the adjusted flame speed.
2. Using the Remote Control:
- Press the "Flame" button on the remote control to activate the flame effect.
- Press the "Flame" button repeatedly to cycle through the available brightness levels (low, medium, high).
- Press and hold the "Flame" button for a few seconds to activate the flame speed adjustment mode.
- While in the flame speed adjustment mode, press the "+" or "-" buttons on the remote control to increase or decrease the flame speed, respectively.
- Release the "Flame" button to save the adjusted flame speed.
Please refer to the user manual for more detailed instructions and illustrations on adjusting the flame effect brightness and speed.
Add New Comment