User Manual Q&AAnswer
Jan 13, 2025 - 01:38 AM
To adjust the straps on the 1Storm HF802 Dual Sport Motorcycle Helmet for a secure fit, follow these steps:
1. Put on the helmet and position it on your head.
2. Locate the chin strap, which is attached to both sides of the helmet.
3. Adjust the length of the chin strap by pulling the excess strap through the plastic buckle.
4. Once you have achieved the desired length, secure the chin strap by inserting the excess strap into the buckle until it clicks into place.
5. Make sure the chin strap is snug but not too tight, allowing you to open your mouth comfortably.
6. Adjust the straps on the sides of the helmet by pulling the excess strap through the plastic buckles on each side.
7. Once the straps are adjusted to your preference, secure them by inserting the excess strap into the buckles until they click into place.
8. Check the fit of the helmet by gently shaking your head from side to side and up and down. The helmet should stay securely in place without excessive movement.
It is important to ensure a proper and secure fit for maximum protection and comfort while riding. If you have any difficulties adjusting the straps or achieving a comfortable fit, refer to the user manual or contact the manufacturer for further assistance.
Add New Comment