User Manual Q&AAnswer
Jan 13, 2025 - 01:33 AM
To charge the rear light on the VICTGOAL VG112 helmet, simply follow these steps:
1. Locate the USB charging port on the rear light. It is usually located on the back or bottom of the light.
2. Connect one end of the included USB charging cable to the USB charging port on the rear light.
3. Connect the other end of the USB charging cable to a USB charger or a computer with a USB port.
4. Ensure the USB charger or computer is powered on.
5. The rear light should start charging automatically once connected. You may see a charging indicator light or LED on the rear light to indicate that it is charging.
6. Allow the rear light to charge until it reaches full capacity. The charging time may vary depending on the specific model and battery capacity.
7. Once fully charged, disconnect the USB charging cable from the rear light.
8. The rear light is now ready to be used. Make sure to turn it on before your ride for enhanced visibility.
Note: It is recommended to fully charge the rear light before your first use and to periodically recharge it to ensure optimal performance during rides. Refer to the user manual for specific charging instructions and recommendations for your VICTGOAL VG112 helmet.
Add New Comment