User Manual Q&AAnswer
Jan 13, 2025 - 01:21 AM
To charge the rear lights on the FUNWICT Rechargeable Rear Light Bicycle Helmet, follow these steps:
1. Locate the charging port: The charging port is usually located on the back of the helmet, near the rear lights.
2. Connect the USB cable: Take the included USB cable and connect one end to the charging port on the helmet.
3. Connect to a power source: Plug the other end of the USB cable into a USB power source, such as a computer, wall adapter, or power bank.
4. Charging indicator: Once connected, a charging indicator light may illuminate on the helmet or the USB cable, indicating that the lights are charging.
5. Charging time: Allow the rear lights to charge for the recommended duration specified in the user manual or product documentation. This duration may vary depending on the specific model and battery capacity.
6. Charging complete: Once the rear lights are fully charged, the charging indicator light may turn off or change color, indicating that the charging process is complete.
7. Disconnect the USB cable: Safely disconnect the USB cable from both the helmet and the power source.
Note: It's important to follow the manufacturer's instructions for charging to ensure proper and safe charging of the rear lights.
Add New Comment