User Manual Q&AAnswer
Jan 13, 2025 - 12:42 AM
To install the Luminans JP-AL07R WiFi+Ir Digital Music Led Ambient Light, follow these steps:
1. Align the hole on the mounting base with the xxxx hole at the bottom of the lamp housing and adjust the bracket to a linear position.
2. Insert the xxxx into the mounting hole and tighten it with an Allen key.
3. Check that the underside of the lamp housing closes with the mounting surface on the bracket. If it doesn't, adjust the direction of the bracket.
4. After the lamp body has been locked to the base, the angle of rotation cannot be to the left or right.
5. Tear off the adhesive paper and attach it to the back of the lower shell in two places.
6. Wipe the surface to be attached, then tear off the other side of the adhesive paper and paste it on.
Please note that the appearance of all products is subject to actual conditions, and the pictures in the manual are for reference only.
For a visual representation of the installation process, refer to the wiring diagram provided in the manual.
Add New Comment