How do I install the astro Trimless Mini LED Ceiling Recessed Spotlight? (astro Trimless LED Ceiling Spotlight Instruction Guide)

Answer

manuals.plus

Jan 13, 2025 - 12:22 AM

Installation of the astro Trimless Mini LED Ceiling Recessed Spotlight requires careful following of the instructions provided. Here is a step-by-step guide on how to install the spotlight:

1. Before starting the installation, make sure to read the instructions carefully and gather all the necessary tools and materials.

2. Ensure that the power supply to the installation area is switched off to avoid any electrical hazards.

3. Identify the live and neutral wires in your electrical supply. The live wire is usually brown or red, while the neutral wire is typically blue or black. Connect the live wire to the brown or red wire on the spotlight and the neutral wire to the blue or black wire.

4. Once the electrical connections are made, carefully insert the spotlight into the ceiling cutout. Make sure the spotlight is securely held in place.

5. Connect the spotlight to the power supply and switch on the power to test the functionality of the spotlight. If it is working properly, proceed to the next step.

6. Adjust the position of the spotlight if necessary. Some models may allow for tilting or rotating to achieve the desired lighting angle.

7. Finally, ensure that the spotlight is properly aligned with the ceiling surface for a seamless and trimless appearance.

Please note that these instructions are a general guide, and it is always recommended to refer to the specific instructions provided with the astro Trimless Mini LED Ceiling Recessed Spotlight for accurate installation steps.