User Manual Q&AAnswer
Jan 13, 2025 - 12:21 AM
To pair the ILM 953 Bluetooth Motorcycle Helmet with your smartphone or other Bluetooth devices, follow these steps:
1. Ensure that both the helmet and your device's Bluetooth function are turned on.
2. Put the helmet in pairing mode by pressing and holding the Bluetooth button on the communication module until the LED indicator starts flashing rapidly.
3. On your smartphone or device, go to the Bluetooth settings and search for available devices.
4. Select the ILM 953 Helmet from the list of available devices.
5. If prompted, enter the PIN code provided in the user manual (usually "0000" or "1234") and confirm the pairing.
6. Once successfully paired, the LED indicator on the communication module will stop flashing and remain solid.
7. Test the connection by making a call or playing music through the helmet's speakers.
If you are still experiencing difficulties with the pairing process, try the following troubleshooting steps:
1. Make sure that the helmet and your device are within the Bluetooth range (up to 30 meters or 98 feet) and that there are no obstructions interfering with the signal.
2. Ensure that the helmet and your device's Bluetooth settings are correctly configured and not connected to any other devices.
3. Restart both the helmet and your device, then attempt the pairing process again.
4. Consult the user manual for any specific troubleshooting steps related to your device or operating system.
5. If the problem persists, contact ILM customer support for further assistance.
For more detailed instructions and information, refer to the user manual provided with the ILM 953 Bluetooth Motorcycle Helmet.
Add New Comment