User Manual Q&AAnswer
Jan 13, 2025 - 12:13 AM
To install and configure the Lenovo Mellanox ConnectX-6 HDR/200GbE VPI Adapters in your ThinkSystem server, follow these steps:
1. Ensure that your server is powered off and unplugged from the power source.
2. Open the server chassis and locate an available PCIe slot.
3. Remove the adapter from its packaging and align it with the PCIe slot. Insert the adapter firmly into the slot until it is fully seated.
4. Secure the adapter in place using the appropriate screws or clips.
5. Connect the appropriate cables to the adapter's QSFP56 port. You can use either passive copper cables or optical cables, depending on your connectivity requirements.
6. Close the server chassis and reconnect the power source.
7. Power on the server and wait for the operating system to boot up.
8. Install the necessary drivers and software for the adapter. You can download the latest drivers and software from the Lenovo support website or the Mellanox website.
9. Configure the adapter settings according to your network requirements. This may include setting the desired network speed, enabling specific features, and configuring network parameters.
10. Test the connectivity and performance of the adapter by running appropriate network tests or applications.
For more detailed instructions and information, refer to the Lenovo Mellanox ConnectX-6 HDR/200GbE VPI Adapters User Guide or the product guide provided with the adapters. These guides will provide step-by-step instructions, configuration options, and troubleshooting tips to help you successfully install and configure the adapters in your ThinkSystem server.
Add New Comment