User Manual Q&AAnswer
Jan 12, 2025 - 11:55 PM
To install the Richtek Bridgeboard Utilities software for the RD0001-01 Wrenboard General USB-I2C GPIO PWM Tool Kit, please follow these steps:
1. Ensure that your operating system is either Windows 7 or Windows 10.
2. Download the Richtek Bridgeboard Utilities software from the following link: http://www.richtek.com/shareEVB/RTBri...
3. Once the download is complete, run the downloaded file to start the installation process.
4. Follow the on-screen instructions to complete the installation of the Richtek Bridgeboard Utilities software.
Note: The software installation is a prerequisite for using the Wrenboard and controlling the target device through the graphical user interface (GUI).
For more detailed information on operating the software and controlling the target device, please refer to the "Bridgeboard Control Panel User Manual" provided separately.
If you have any further questions or need additional assistance, please refer to the Richtek website at http://www.richtek.com or contact Richtek Technology Corporation directly at the provided contact information.
Important Notice: The information provided in this answer is for reference only. Please refer to the official user manual and documentation for accurate and up-to-date instructions and guidelines.
Add New Comment