User Manual Q&AAnswer
Jan 12, 2025 - 11:53 PM
Installation of the Paul Neuhaus Helix LED Ceiling Lamp 3 Frames 116cm is relatively straightforward. Here are the step-by-step instructions:
1. Before starting the installation, ensure that the power supply is switched off to avoid any electrical hazards.
2. Carefully unpack the contents of the package and make sure all the necessary components are included. The package should contain the lamp frames, LED modules, mounting brackets, screws, and the installation manual.
3. Determine the desired location for the lamp on the ceiling. It is recommended to have a professional electrician assess the suitability of the installation location and to handle the electrical connections.
4. Attach the mounting brackets to the ceiling using appropriate screws and anchors. Ensure that the brackets are securely fixed to provide a stable base for the lamp.
5. Connect the electrical wires from the ceiling to the lamp's wiring. Follow the color-coded instructions provided in the installation manual to ensure correct connections. It is advisable to consult a qualified electrician for this step if you are not experienced in electrical work.
6. Once the electrical connections are made, carefully attach the lamp frames to the mounting brackets. The frames should align properly and securely attach to the brackets.
7. Insert the LED modules into the lamp frames according to the manufacturer's instructions. Make sure the modules are correctly positioned and securely fitted.
8. Finally, switch on the power supply and test the lamp to ensure it is functioning properly. If any issues arise, refer to the troubleshooting section of the installation manual or contact the manufacturer's customer service for assistance.
Please note that these instructions are a general guideline, and it is essential to refer to the specific installation manual provided with the product for detailed instructions and safety precautions.
Add New Comment