User Manual Q&AAnswer
Jan 12, 2025 - 11:40 PM
Installation:
1. Before installation, make sure to disconnect the power supply.
2. Check that all connecting cables comply with regulations and are connected correctly.
3. Ensure that the mains voltage corresponds to the rated voltage on the type plate.
4. If you are not experienced in electrical installations, it is recommended to hire an authorized electrician.
5. Never modify the product as it can result in personal injury and void the warranty.
6. Do not overload the mains to prevent fire or electric shock.
7. Keep the product out of the reach of children.
8. Avoid storing the product in damp or extreme temperature conditions to prevent damage to the electronics.
9. The product should be discarded if the glass front is cracked.
Usage:
1. The Anslut 019942 Dimmable Ceiling LED is suitable for indoor use only.
2. The light source of this luminaire is not replaceable. When it reaches its end of life, the entire luminaire should be replaced.
3. Always disconnect from the power supply before installation, connection, and service.
4. Do not connect the product to the mains while it is still in the packaging.
5. The LED light source is not replaceable. When it reaches the end of its useful life, the complete product must be replaced.
6. The product is dimmable, allowing you to adjust the brightness as desired.
7. The product has a rated voltage of 230V ~ 50Hz, an output of 14.5W, and a luminous flux of 1600lm.
8. The color temperature is 3000K, providing a warm white light.
9. The product has a lifespan of 30,000 hours and can be turned on/off approximately 30,000 times.
10. The product is classified as safety class II and has a protection rating of IP54, making it suitable for certain outdoor environments.
11. The diffusion angle is 120°, providing a wide spread of light.
12. The product dimensions are Ø 294 x 23 mm.
Please refer to the instruction manual for further details and safety precautions.
Add New Comment