User Manual Q&AAnswer
Jan 12, 2025 - 11:30 PM
To adjust the airflow and temperature in Warm mode on the CANVAC CFK3301V 3-in-1 Fan, follow these steps:
1. Press the Warm mode button on the remote control to enter Warm mode. The digital display will show the ambient temperature.
2. Press the temperature button on the right side of the remote control to set the desired temperature. The display will flash, indicating that you can now set the temperature between 1 and 30°C.
3. The set temperature should be higher than the ambient temperature for the heater to turn on. If the ambient temperature reaches the set temperature, the heating function will stop and the airflow will be reduced to the minimum setting.
4. If the ambient temperature drops below the set temperature, the heating function will automatically be reactivated.
5. Note that the default setting temperature is 25°C. In Warm mode, when the ambient temperature is below 0°C, the display will only show "01" without displaying a negative temperature value.
6. The appliance will run for 12 hours in Warm mode and then turn off automatically. You can restart it by pressing the power button or using the remote control.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment