User Manual Q&AAnswer
Jan 12, 2025 - 11:29 PM
To install the IMMERGAS COD.3.032846 Cut-Off xxxx Kit, follow these steps:
1. Connect the flexible hoses (3) to the heat pump (4) and place the flat gaskets (2) in position.
2. Connect the cut-off xxxx (1) to the flexible hoses (3) and place the flat gaskets (2) in position.
3. Complete the hydraulic circuit as needed by placing the flat gaskets (2) between the circuit and the xxxx (1).
4. Once the hydraulic connections are made, perform a hydraulic sealing test.
To use the cut-off xxxx (1), follow these instructions:
1. Use the specific xxxx to open and close the xxxx .
2. To close the xxxx , turn it clockwise. To open it, turn it anti-clockwise.
The IMMERGAS COD.3.032846 Cut-Off xxxx Kit includes the following components:
1. 2x 1-1/4" G female - 1-1/4" G male xxxx
2. 6x Flat gasket 38 x 28 x 2
3. 2x Insulated DN 25 - 1-1/4" Inox hose, length 500 mm
Please note that it is important to read the provided instruction manual carefully to ensure proper installation and usage of the kit. Additionally, make sure to comply with all relevant regulations and safety guidelines. If you have any further questions or concerns, it is recommended to consult with authorized professionally qualified staff or contact the manufacturer for assistance.
Source: https://manuals.plus/immergas/cod-3-0... xxxx -kit-manual
Add New Comment