User Manual Q&AAnswer
Jan 12, 2025 - 11:19 PM
To assemble the techtron Lite 2000 Electric Scooter, follow these steps:
1. Slightly loosen the hex bolts on the collar clamp using the M6 hex key.
2. Insert the standpipe into the collar clamp.
3. Park the scooter with the kickstand. Step on the footboard, hold the handlebar, and push forward to unfold the scooter.
4. Tighten the bolts on the collar clamp using the M6 hex key.
5. If the brake is too tight or loose, you can adjust the brake cable by threading it in or out using the brake cable adjuster.
For more detailed instructions, please refer to the "Assembly" section in the techtron Lite 2000 Electric Scooter Instruction Manual.
Add New Comment