User Manual Q&AAnswer
Jan 12, 2025 - 11:16 PM
To assemble and install the , follow these steps:
1. Assembling the solar lights:
- Insert the bottom of the solar light (A) into the top of the pole (B).
- Remove the ground stake (C) from the bottom of the pole (B).
- Insert the top of the ground stake (C) into the bottom of the pole (B).
- Repeat this step for each solar light (A), pole (B), and ground stake (C).
2. Preparing the solar panels:
- Twist off the top of the solar light (A) and remove the tab from the battery compartment (1) located on the underside of the solar panel top.
- Twist the top of the solar light back on.
- Repeat these steps for each solar light.
3. Installing the solar lights:
- Prepare a hole in the ground for each solar light.
- Use a tool such as a screwdriver to prepare the installation hole to ensure that the hole is not larger than the ground stake (C).
- Insert the solar light assembly into the prepared hole.
For more detailed instructions and safety information, please refer to the Hampton Bay SPP250112PK4 Solar Bronze and Warm Wood LED Path Light Instruction Manual provided with the product.
Add New Comment