User Manual Q&AAnswer
Jan 12, 2025 - 10:52 PM
To install the KS VERLICHTING 7737 Outdoor Charge Timer Garden Socket, it is recommended to hire a qualified electrician. Before starting the installation, ensure that the main power supply is disconnected at the fuse box and use a voltage tester to confirm that the wiring is off circuit. It is not enough to simply turn off the power at the switch. Additionally, make sure to comply with local regulations regarding earthing on the electrical lead.
Here are the steps for installation:
1. Place the pole on the ground and mark the positions for the necessary boreholes on the foundation.
2. Drill the holes as marked and insert the plugs.
3. Pull the strip with the terminal block from the socket.
4. Attach the wires, ensuring that the correct colors are matched:
- Blue lead = Neutral (N)
- Brown or Black lead = Live (L)
- Yellow/Green lead = Earth (not applicable for class II light fittings)
Note: The brown wire (L1) corresponds to the mains cable L (or the connector marked with the symbol L), the blue wire (N1) corresponds to the neutral conductor N (or the connector marked with the symbol N), and the yellow/green wire (1) corresponds to the earth cable (or the luster terminal with the symbol).
5. Place the strip back into the socket. The socket is now ready for installation on the foundation.
6. Once the installation is complete, switch on the main power supply.
Please note that these instructions are a summary and it is important to refer to the specific instructions provided in the KS VERLICHTING 7737 Outdoor Charge Timer Garden Socket Instruction Manual for accurate installation guidance.
Maintenance requirements for the socket include regularly rubbing the surface with a neutral oil or water without cleaning agents and wiping it with a soft cloth. It is also recommended to keep the socket away from salty environments, coastal locations, and acid-free environments, as these can affect its performance. Regularly rubbing it with Carwash can help prolong the lifetime of the socket.
For the timer function, the instruction manual provides setup procedures and guidance on setting the current time and activating/deactivating the timer. It is important to follow these instructions carefully to ensure proper functioning of the timer.
Please note that if there is a power outage, the current moment must be recalibrated. Unless you need to change the settings, the same setup procedures can be followed every day.
If there is a need for repair, it is advised to consult a qualified electrician in accordance with local safety regulations and use original parts. Disassembling the mechanical timer is not recommended.
For further details and specific instructions, please refer to the KS VERLICHTING 7737 Outdoor Charge Timer Garden Socket Instruction Manual.
Add New Comment