User Manual Q&AAnswer
Jan 12, 2025 - 10:49 PM
To install the SHERPA 251440 Roam Case Mounts on your vehicle, please follow these steps:
1. Start by selecting the cross members you want to use and position them along the slots of your sideplates. Make sure the edge of the Roam case aligns with the side of the cross member. Note that if the cross member has mounting feet attached, it is rigid and cannot be moved.
2. Open the lid of your Roam case and drop the case mounts into the rectangular holes found along the inside lip of the case. The location of the holes may vary depending on your case size and preferred configuration.
3. For each side of the case, you will need the following components:
- 2 1/4”-20 x 9/16” bolts
- 2 1/4”-20 Tnuts
- 2 1/4” flat washers
4. Insert two Tnuts into the side slot of a cross member. Secure the Roam case mount with the 9/16” bolts and washers. Repeat this step for the other side of the case.
5. Once installed, the Roam case will be securely mounted and the lid will still be fully functional. Note that the installation requires removing the rope handles included with each Roam case.
Please refer to the SHERPA 251440 Roam Case Mounts Instruction Manual for further details and illustrations on the installation process.
Add New Comment