User Manual Q&AAnswer
Jan 12, 2025 - 10:48 PM
To pair additional remotes with the Tough Leads Professional Remote Control Switch, follow these steps:
1. Locate the small black box button within the remote control enclosure.
2. Ensure that power is connected to the unit.
3. Press the button on the black box once. The indicator will flash once and then remain on.
4. Firmly press the module pairing button once. The indicator will remain on.
5. Press the ON button on the remote. The indicator will flash 3 times and then remain continually on after the third flash.
6. Press the OFF button on the remote. The indicator will flash 3 times.
7. Repeat steps 5 and 6 for each additional remote you want to pair.
8. To completely clear all paired remotes, press the button on the black box 8 times.
Please note that the Tough Leads Professional Remote Control Switch will only operate with remotes that have separate ON and OFF buttons. Single button remotes are not compatible.
For more detailed instructions and illustrations, please refer to the "Pairing Additional Remotes" section in the Tough Leads Professional Remote Control Switch User Manual.
Add New Comment