User Manual Q&AAnswer
Jan 12, 2025 - 10:46 PM
The xxxx fix instructions for the oe electronics INSTR1295 QIKDOC are as follows:
1. Start by identifying the xxxx locations on the QIKDOC. These are the points where you will attach the brackets.
2. Using the screws provided, fit the brackets to the QIKDOC. You will need a T10 Torx bit to tighten the screws securely.
3. Once the brackets are attached, xxxx the QIKDOC into place. Make sure it is securely fastened.
4. To attach the QIKPAC CARRY to the QIKDOC horizontally, align the QIKPAC CARRY with the QIKDOC. Slide the heel side of the QIKPAC CARRY into the QIKDOC first and rotate it until you hear a click.
To remove the QIKPAC CARRY from the QIKDOC horizontally:
1. Locate the thumb release on the QIKDOC (highlighted orange). Pull the thumb release to release the QIKPAC CARRY.
2. Lift the QIKPAC CARRY from the QIKDOC once it is released.
If you have any further questions or need additional assistance, please feel free to contact the OE Electronics customer support team. For customers in the UK, you can reach them at sales@oeelectrics.co.uk or by calling +44 (0) 1924 367 255. For customers in Australia, you can contact them at sales@oeelsafe.com.au or by calling 1300 ELSAFE (357 233).
Source: https://manuals.plus/oe-electronics/i... xxxx -fix-manual
Add New Comment