User Manual Q&AAnswer
Jan 12, 2025 - 10:18 PM
To connect the Memphis Audio SBT1 Bluetooth Streaming Device to your amplifier, follow these steps:
1. Locate the RCA terminal on the Bluetooth receiver and the RCA AUX input on your amplifier.
2. Connect the Bluetooth receiver's RCA terminal to the amplifier's RCA AUX input using an RCA cable.
3. Find the negative terminal of your 12v battery and wire the ground of the Bluetooth receiver to it.
4. Locate the ignition lead and wire the positive of the Bluetooth receiver to it. This will ensure that the SBT1 turns off when the ignition is off.
5. Turn on Bluetooth in the settings of your desired streaming device (e.g., smartphone, tablet, etc.).
6. Look for the device named "Memphis Amplifier" in the list of available Bluetooth devices and select it.
7. If prompted, enter the four-digit passcode "0000" to complete the setup process. This is a one-time step required for initial pairing.
8. Once the Bluetooth connection is established, you can start streaming your music wirelessly.
Please note that the above instructions are based on the information provided in the Memphis Audio SBT1 Bluetooth Streaming Device manual. For more detailed instructions or troubleshooting, refer to the manual or contact Memphis Audio customer support at 800.489.2300 or visit their website at www.memphiscaraudio.com
Add New Comment