User Manual Q&AAnswer
Jan 12, 2025 - 10:07 PM
To pair the code lock with your garage door opener, follow these steps:
1. Plug in the code lock and ensure that the display shows "H" and the light is on, indicating standby mode.
2. Press and hold the LEARN button on your garage door opener for at least 2 seconds. The display will show "•" to indicate it is ready to pair.
3. Enter the code "8888" on the code lock panel, and then press either button A or B twice. The display will flash several times, followed by showing "H". This indicates that the garage door opener has learned the keypad code on either position A or B.
4. If you want to pair additional keypads, repeat the above steps. The garage door opener can learn up to 2 keypads.
Note: If you want to remove the pairing between the garage door opener and the code lock, press and hold the LEARN button until the display shows "H". This method will also remove the pairing with any remote controls.
For more detailed instructions and troubleshooting, please refer to the instruction manual provided with the product.
Add New Comment